Solaris Perforated 1% 18"x24" (46 X 61cm) 4/CS

Controlled stretch and drape allows firm handling for a rigid, conforming splint

Resistance to Stretch

• Moderate to maximum resistance to stretch.
• Can be stretched and pulled around curves without thinning or growing out of control.
• Able to position limb and aggressively hold and stretch material to form splints.

Drape

• Moderate drape.
• Takes on the contours of the hand for an intimate fit using only moderate pressure.
• Thinner material follows the curves of the hand and fingers with minimal handling.

Memory

• Moderate memory will spring back slightly while warm.

Rigidity

• Maximum rigidity.
• Splints will hold their shape against the pull of strong dynamic components and against hypertonicity.

Bonding

• Uncoated Solaris™ provides a slightly sticky surface when warm to keep material in place for an intimate fit.
• A permanent bond is achieved by applying dry heat and pinching it together firmly. No solvent is needed.

Surface Finish

• Resists fingerprinting.
• Fingerprints and other marks disappear or can be smoothed away by rubbing the surface gently while the splint is warm.
• Leaves sealed, smooth edges when cut warm.

Applications

• Ideal for abnormal tone conditions or joint contractures when patients are unable to cooperate.
• Its unique qualities make Solaris™ perfect for upper and lower extremity positioning splints and pediatric, non-weightbearing AFOs.
• The combined drape with controlled, resistive stretch of Solaris™ allows aggressive, firm handling to form a rigid splint that conforms perfectly to the body.

Working time (1/8")

• Allows four to six minutes to form and harden after softening in 160° F (71° C) water.

Latex Free

Free of BPA chemicals

See Specs tab for perforation and thickness

Sheets sold case of 4.